Installing the QuietStove

  1. 1.Remove the flame spreader plate.

  2. 2.Place the QuietStove into the bell housing and press down.

  3. 3.Rotate the QuietStove so that the arrow is pointing at the fuel line.

    1. 1.The cap must be fully seated into the bell housing.

    2. 2.Ensure that there are no gaps between the bell housing and the outer lip of the QuietStove.

  4. 4.Prime the stove and

    1. 1.Pressurize the fuel bottle

    2. 2.Open the fuel bottle valve. (close after one to two seconds if your stove does not have a valve at the stove)

    3. 3.Open the stove valve for about one to two seconds to prime the stove.

  5. 5.Light the stove and let the priming fuel completely burn away.

  6. 6.Reopen the stove valve and re-light the stove by aiming your flame at the QuietStove holes. Do not aim your flame below the QuietStove as this will cause underburn. See Notes tab.

productinfonotes.html
Notesproductinfonotes.html
productinforemove.html
Removeproductinforemove.html
Install
QuietStoveindex.html
Product Info*productinfonotes.html
FAQfaq.html
Storehttp://store.quietstove.com/
Forumhttp://www.quietstove.com/forum
Testimonialsindex.html

The QuietStove is one solid piece of metal.  It is constructed with stainless steel, which is corrosion resistant. The QuietStove will make your stove approximately twice as quiet (-10db difference).

Product Information

Hometestimonials.html